Skip to main content

Changes to Step #6

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

+[title] Installation - 4 pin power harness
+[* black] Using the 24 pin power harness, locate and connect to Battery and Ignition sources
+ [* icon_note] I.E. - Ignition switch or fuse box
+[* black] Using a ring terminal, terminate the ground wire to chassis using a self tapping screw or a factory bolt.
+[* icon_note] Wire colors:
+ [* red] Red = Battery
+ [* violet] White = Ignition
+ [* black] Black = Ground

Image 1

No previous image

Added