Skip to main content

Changes to Step #6

Edit by patrice scattergood

Edit approved by patrice scattergood


Step Lines

-[title] Installation - 4 pin power harness
+[title] Install 3-Wire
[* black] Using the 24 pin power harness, locate and connect to Battery and Ignition sources
[* icon_note] I.E. - Ignition switch or fuse box
[* black] Using a ring terminal, terminate the ground wire to chassis using a self tapping screw or a factory bolt.
[* icon_note] Wire colors:
[* red] Red = Battery
[* violet] White = Ignition
[* black] Black = Ground