Skip to main content

Changes to Step #12

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[title] Installation - Power Connections
[* black] Using the 24 pin power harness, locate and connect an Ignition source. The device will be supplied Battery and Ground through the diagnostic connector & harness.
[* icon_note] Ignition can be found at the fuse box
[* black] Wire colors:
[* red] Red = Battery
[* icon_caution] Not used, Do Not Connect. Insulate wire and secure excess wire.
[* violet] White = Ignition
[* black] Black = Ground
[* icon_caution] Not used, Do Not Connect. Insulate wire and secure excess wire.