Skip to main content

Changes to Step #17

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[title] Installation - Location
[* black] Find a location for device to be installed.
[* icon_note] Unit needs to be mechanically secured with Zip-tie, Velcro, etc...
[* icon_note] Device should be installed (sticker side up) with a clear line of site out of the vehicle.
[* icon_note] Device will work through glass, plastic, and most composites.
[* icon_caution] Do Not place directly under metal
[* green] Behind this switch panel is often a good place for securing the device.