Use Spotlight to install and set up a Xirgo vehicle tracker

Time required: 30-60 minutes

This guide explains how to use the Verizon Connect Spotlight app to install and set up a Xirgo vehicle tracker.

In this guide:

• Overview
• Step 1: Download and log into the Spotlight app
• Step 2: Assign the vehicle tracker to the device
• Step 3: Connect the Xirgo device to the vehicle
• Step 4: Enter the vehicle information and connect to Reveal

Overview

When you use the Spotlight app to install a device, it:

• Guides you through the installation and setup of the device.
• Assigns the device to the vehicle.
• Allows you to enter vehicle information.
• Connects the device to the Verizon Connect fleet management tool.
• Provides help when you need it.

The engine must be OFF when you are installing the device.

Step 1: Download and log into the Spotlight app

1. Download the Spotlight by Verizon Connect app onto your mobile device.
   
2. Log into the app with your Verizon Connect login details.
   If you do not have login details, contact your administrator.

Step 2: Assign the vehicle tracker to the device

1. In the Spotlight app, go to Account > Device setup.
2. On the What do you want to install? screen, tap Vehicle tracker.
3. On the Select vehicle screen, tap NEW VEHICLE.
4. On the Identify the device screen, use your mobile device to scan the barcode on the vehicle tracker.
   If it's not possible to scan the barcode, tap Manual input, and enter the vehicle tracker’s serial number.

Step 3: Connect the Xirgo device to the vehicle

1. On the Welcome screen, tap GET STARTED.
   The Read the installation guide screen displays.
2. Tap and access the installation guide for the type of installation.
   • Installation guide: Xirgo with powered Y-cable | 6 or 9 pin
   • Installation guide: Xirgo with powered Y-cable | OBD-II
   • Other Xirgo installation methods
3. Install the Xirgo device in the vehicle as outlined in the relevant installation guide.

Step 4: Enter the vehicle information and connect to Reveal

1. Once you have installed the device in the vehicle, choose SKIP TO CONNECT VEHICLE.
2. When the device is recognised, tap CONNECT.
3. While waiting for the device to connect, you can enter the vehicle information. To do this, tap EDIT VEHICLE PROFILE.
4. On the Vehicle identity screen, enter the vehicle information and choose Save.
   Complete and accurate vehicle information allows Verizon Connect to provide better information about your vehicle.
   Enter the following information:
   • Vehicle name (mandatory)
   • License plate number (mandatory)
   • VIN
   • Year, Make, Model
   • Fuel type
   • Tank capacity
   • Fuel efficiency (city)
   • Fuel efficiency (highway)
   • Current odometer reading
5. When the vehicle is successfully connected, the vehicle appears on the map with a pop-up that says Vehicle Connected.
   If the connection fails, refer to Why is my vehicle not reporting?
   
   
6. Tap COMPLETE SETUP and then CLOSE to complete the setup.

Next steps

• Verify your installation in Reveal.

Disclaimer

Verizon Connect shall have no liability whatsoever for any damages that arise from, or are connected with, your use of our services, including the GPS tracking hardware and dash cams, in a manner contrary to the(se) instructions or in violation of law and/or our agreement. Tracking hardware connected to the diagnostic port in any vehicle that has third-party devices also connected to the diagnostic port can cause interference or loss of functionality of the third-party device. These third-party devices include, but are not limited to, wheelchair lifts, lifesaving equipment, emergency lighting, and radar guns. If such a conflict exists, contact Verizon Connect support to have the tracking hardware configured to support the third-party device. Failure to do so relieves Verizon Connect of all liability for damages that arise from or are connected with your use of the devices. Installed devices may only be removed and transferred to another vehicle if the second vehicle has been tested for compatibility, as per the(se) instructions. Transfers between vehicles which do not follow the(se) instructions will void any and all warranties from Verizon Connect, and relieve Verizon Connect of all liability for damages that arise from or are connected with your use of the devices.