Find the road-facing camera (model 2)'s video connector

This is a printed page that might be out of date. To read the most up-to-date help content, visit https://device-help.verizonconnect.com.

To install the driver-facing camera (model 2), you need to find and connect to the road-facing camera’s video connector cable. This is sometimes hidden inside the headliner or behind the A-pillar.

Find the connector

  1. Locate the cable coming from the road-facing camera and follow it to the headliner.
    Find_the_model_2_connector.png
  2. Slowly pull on the cable to remove it from the headliner.
  3. If the connector is not behind the headliner, remove the A-pillar cover. This may be as simple as removing the screw or releasing the clip that holds the A-pillar in place. However, always consult the vehicle manual first.
    Do not undo the clips that hold the airbag in place, to avoid setting off the airbag.

    Remove_the_A-pillar.png

Was this article helpful?


0 out of 0 found this helpful