1. Device Help
  2. Cameras
  3. Camera support

Verify a camera installation in the Enterprise Installer Portal

This is a printed page that might be out of date. To read the most up-to-date help content, visit https://device-help.verizonconnect.com.

This article explains how to verify the installation of a camera into a vehicle using the Enterprise Installer Portal.

  1. Sign in to the Installer Portal.

  2. Select Install Camera.

  3. Enter the camera serial number and select SEARCH.

    image16.png

  4. If the camera is already assigned to a vehicle, select Unassign the camera now then Search.

    image28.png

  5. Find the vehicle in the list for camera assignment and choose SELECT VEHICLE.

    image3.png

  6. Select the indicator light sequence you see on the camera.

    image23.png

  7. Adjust the road-facing camera so that the red line is on the horizon (at least 25 yards ahead) and select NEXT STEP.

    image2.png

  8. Adjust the driver-facing camera, if you have one, so that it points towards the center of the cabin and select NEXT STEP.

    image5.png

  9. Check the vehicle and tracker details. Then select ASSIGN CAMERA or CHOOSE ANOTHER VEHICLE.

    image24.png

  10. Select FINISH to return to the homepage or INSTALL ANOTHER CAMERA.

    image30.png

For instructions on installing the dashcams:

Was this article helpful?

0 out of 0 found this helpful