Install and set up Extended View Cameras with Reveal Hardware Installer
In the Revel Hardware Installer app, scan the device or enter the ESN.
- Select Search.
Select the corresponding installation line item and then select Continue.
To identify the vehicle, enter or scan the VIN and select the vehicle you used for the install.
Note
To change the search method to VTU ESN, road-facing camera ESN or license plate number select change search method.
Before proceeding:
- Ensure the vehicle is an area with good network coverage.
- Turn on the vehicle so the devices receive power.
Select Get started.
The app will then check the DVR status.
Note
The device must be online before proceeding
- Once the DVR is online, select Next.
Select the camera you want to set up and click Next.
Select a channel with an available preview to associate with your chosen camera and click Next.
- Make sure the camera is positioned correctly and adjust if necessary.
Select where the camera is positioned on the vehicle by choosing an option from the dropdown list and click Next.
Note
Selecting where a camera is installed makes it easier to identify which camera recorded a video.
- Repeat steps 9-12 until all cameras in the kit are set up.
On the Set up cameras screen, select Next.
- To assign the devices to the vehicle, select Next.
On the Device Details screen, select Check in to complete the installation.