Vehicle tracker

This is a printed page that might be out of date. To read the most up-to-date help content, visit https://device-help.verizonconnect.com.

This guide explains how to set up a vehicle tracker such as a CalAmp or Xirgo device using the Reveal Hardware Installer app.

If you are installing a Vehicle Data Device (VDD), read Vehicle Data Device installation process.

  1. Select the Installation Work Ticket.
  2. Enter or scan the device ESN.
    RHI_VTU_Identify_Device.png
  3. Tap Search.
  4. Select the type of Installation line item.
    RHI_VTU_Select_Installation.png
  5. Add vehicle information to the Details tab.
    RHI_VTU_Vehicle_Details.png
  6. Select the QA Test tab.
    RHI_VTU_Finalize_Install.png
  7. Select the peripherals that were installed on the Select Installed Peripherals menu.
  8. Tap Save.
  9. Tap on an item in the Peripherals Installed list to begin testing.
  10. Follow the on screen instructions to complete the test.

Next: Vehicle tracker QA testing.


Was this article helpful?


0 out of 0 found this helpful